CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
Contact Us About This Machine
|Machine Information Sheet||Date: 4/24/2018|
|Machine Type:||Planers - Thickness|
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
|Machine Capacities:||This planer is especially designed and built for woodworking plants, cabinet shops, pattern shops, manual training schools and maintenance department of industrial plants. It is an efficient and compact machine and a throughly rigid surfacer which will give the highest quality of smooth and accurate planing. Made of a heavy box type casting, well ribbed for strength and rigidity. All feed mechanism is enclosed within the machine frame and easily accessible. Large flat vertical ways provide more than adequate support for the table and supplement the table elevating screws located on a heavy mid-way between the vertical ways. The bed is heavily ribbed one-piece casting with an accurate surface and is provided with guides at each side to ensure straight feeding of short stock. It is raised or lowered by two elevating screws resting on ball thrust bearings for minimum friction on the seats by means of helical gears and handwheel.The bed feed rolls are adjustable simultaneously by the conveniently placed hand knob at the front of the table. The ideal setting of the rolls can be made in a matter of seconds to suit different kinds of material. The feed rolls are 4" in diameter and have coiled springs that apply the required pressure on the top rolls. All feed rolls are power driven. The infeed roll is grooved, the bed rolls and upper outfeed roll is smooth. The chipbreaker is sectional and made of 2" steel toes, each is loaded with helical springs.
-Max Width: 24" (609.6mm)
-Minimum thickness: 1/8" (3mm)
-Maximum thickness: 8" (203.2mm)
-Minimum length: 4" (101.6mm) butted
-Max depth of cut: 1/2" (12.7mm)
-Knives: 4 x 24" (609.6mm)
-Bed width x length: 25-3/4" x 45" (654 x 1143mm)
-Feed roll diameter: 4" (101.6mm)
-Feed Rate: 20-60 fpm (6-18.28mpm)
-Motor: 10hp 208/220v 3ph
-Made in Canada
|Sales Price:||$12,000.00 CDN|
|Approximate Monthly Lease:||
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.
|Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.|