CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
Contact Us About This Machine
Weeke BHC 250
|Machine Information Sheet||Date: 4/25/2018|
|Machine Type:||CNC Machining Centers - Pod and Rail|
|Region:||North East US|
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
|Machine Capacities:||-Work area capacity: 2750mm (108.3") length, 1000mm (39.2") drilling width. Y-axis 1252mm (49") and Z-axis for routing 135mm (5.3").
- THK linear motion guides on all axes, feed speed on X-axis is 263 FPM, Y-axis 196 FPM and Z-axis 64 FRM.
-Boring unit has eleven (11) independent vertical spindles, six (6) in X and five (5) in Y plus one (1) reinforced separate spindle for larger drills up to 35 mm diameter, is offset on the X-axis.
-Four (4) horizontal spindles in X-axis for edge boring in left and right panel edges plus two (2) spindles for edge boring in the front and rear panel edges.
-Equipped with one (1) 8HP (6kW) HSK-63 high speed, liquid cooled electro spindle router. Six position "on the fly" rotary ATC tool changer. Router is powered by an 11kW frequency inverter programmable from 9000-18000 RPM with constant power at all spindle speeds, right or left hand rotation.
-2HP grooving saw installed on the front of the head in X-axis only uses a 100 mm diameter saw blade.
-Worktable: six (6) movable support rails, twelve (12) square matrix vacuum cups, ten (10) cups 115mm x 140mm and two (2) cups 125mm x 75mm, using rubber seals in the matrix of the vacuum cup, it is possible to hold 50mm wide strips.
-Eight (8) pneumatic backstops, two (2) movable pneumatic side stops, and one (1) vacuum connection for templates made by the customer.
-“Power Control System” with WOODWOP Windows based controller: 3-Axis, linear, circular & helical interpolation, NUM programmable logic control operation system, color graphic monitor, industrial keyboard for data entry, 3 ˝" floppy disk drive.
-EtherNET interface for LAN connection to office PC is possible, RS-232 serial interface for PC connection. All are mounted in a separate free standing control cabinet.
-Complete with man-height safety enclosure around rear and sides of the machine, 2 zone safety mats (will stop machine if operator enters work area).
|Sales Price:||$35,000.00 USD|
|Approximate Monthly Lease:||
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.
|Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.|