Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Brandt Optimat KD 66

Used Brandt Optimat KD 66 | Edgebanders

Machine Information Sheet Date: 6/18/2018
Inventory #: C3641TS
Machine Type: Edgebanders
Manufacturer: Brandt
Model: Optimat KD 66
Year: 2001
Region: Eastern Canada
Voltage: 230/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Good
Machine Capacities: -Edge capacity: 5/16" (0.4-8mm)
-Panel thickness: 5/16" - 1 9/16"
-Minimum panel length: 6 3/8" (160mm)
-Minimum panel width: 2 1/2" (65mm)
-Line control for workstation function - no limit switches.
-Quick heat-up glue system with overhead hopper feed
-"Quick Change" glue tank for color change or maintenance.
-Strip and coil stock: automatic magazine
-3mm PVC guillotine
-Infrared heat zone with reversible rotation glue roller
-One (1) drive and two (2) idle roll pneumatically controlled pressure section
-End trim: double motor {0.5 HP (12000 RPM) each}, bevels 0-15
-Top & bottom flush/radius trim: 0.75 HP (12,000 RPM) bevels 0-25 with insert knives for 3mm PVC
-Top & bottom profile scraping: 2-6mm radius with pneumatically controlled blow-off nozzles
-Top & bottom buffing: 0.25 HP (1,400 RPM) motor
-HF motors with electronic brakes on end trim and flush trim stations
-Feed chain track speed: 42 FPM
-Feed drive: 2HP
-Swiveling operator control panel
-PLC, keypad and LED readouts
-Padded sound enclosure
-Extended and heated in-feed fence
-Electronic frequency inverter: 4kW
Sales Price: $11,800.00 CDN
Approximate Monthly Lease: $207.44 CDN
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.