Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine


SCM Olimpic K1000 with a Taylor return conveyor

Used SCM Olimpic K1000 with a Taylor return conveyor  | Edgebanders






 
Machine Information Sheet Date: 1/23/2018
Inventory #: X3725AC
Machine Type: Edgebanders
Manufacturer: SCM
Model: Olimpic K1000 with a Taylor return conveyor
Year: 2007
Region: Eastern Canada
Voltage: 230/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Good
Machine Capacities: EDGE BANDER COMPLETE WITH A TAYLOR RETURN CONVEYOR

-end trim
-top and bottom trim
-corner rounding
-profile scrapers
-buffing


- track feed speed 12-18 m/min
- working height during trimming 8-55 mm
- working height during rounding 10-45 mm
- min. panel height with 2 mm edge 10 mm
- thickness for edges in strips 0,4-8 mm
- thickness for rolled edges 3x45 mm
- max. exceeding material
to the panel thickness 4 (2+2) mm
- min. edge length with rolled edge 180 mm
- min edge length with edge in strips 280 mm

- min. panel width with rolled edge 60 mm
(min length 210 mm)
- min. panel width with edges in strips 100 mm
(minimum length 210 mm)

- min. panel length with rolled edges 140 mm
(minimum width 100 mm)
- min. panel length with edges in strips 210 mm
(minimum width 100 mm)
- distance between two successive panels 800 mm


VC/500 GLUE POT UNIT
- absorbed power 2,4 kW
- glue granules capacity 1,5 kg

K/SEL END CUTTING UNIT
- motor power 0,35 kW
- speed of cutters 12000 rpm
- blades tilting 0-15 deg

RI/1000 TRIMMING UNIT
- tilt 0-25
- motor powers each. 0,55 kW
- speed of cutters 12000 rpm

"ROUND K" ROUNDING UNIT
- motor power each 0,55 kW
- speed of cutters 12000 rpm
- max. working edge thickness 3 mm


EDGE SCRAPING UNIT
- knives with radius 3 mm

BUFFING UNIT
- motor power 0,18 kW
- TRANSFORMER AVAILABLE FOR 600 VOLT.


-BANDER ON IT`S OWN ..$19500.00
-RETURN CONVEYOR......$7500.00

Sales Price: $24,300.00 CDN
Approximate Monthly Lease: $427.21 CDN
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.