Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Cameron Opti-Match Color Matching / Panel Sizing System

Used Cameron Opti-Match Color Matching / Panel Sizing System | Miscellaneous

Machine Information Sheet Date: 1/21/2018
Inventory #: C3762TS
Machine Type: Miscellaneous
Manufacturer: Cameron
Model: Opti-Match Color Matching / Panel Sizing System
Year: 2001
Region: Eastern Canada
Voltage: //
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Good
Machine Capacities: -Opti-Match combines innovative scanning and sorting technology with complex computer programs to build and stack sized, color matched, and color blended panels, automatically. It completely eliminates the labor intensive and subjective job of manual color matching
-Opti-Match measures the width of each board and scans the color of the board as well. It then combines these
boards into panels that are sized, color matched and
color blended, and then automatically stacks the
panels, ready for gluing.
-Operation of the Opti-Match is simple. The operator
enters the desired panel width into the computer.
The machine is quickly adjusted by a hand crank to accommodate the board length. Boards are then placed on the infeed of the machine. The Opti-Match singulates the boards and feeds them under color and width sensors. The computer uses this information to select the optimal combination of boards to build an accurately sized, color matched and color blended panel. To build the panel the Opti-Match uses a series of lifters to re-arrange the order of the boards on the conveyor. The newly arranged boards continue to travel down the conveyor to the stacker. The stacker piles the created panels into a neat stack using a self-leveling scissors lift. When the lift is full, the machine stops itself. The operator rolls the stack off the lift and raises it for the next stack.
-The Opti-Match considers twenty-two boards at a time. It uses its computer power to analyze hundreds of thousands of possible combinations, all in a fraction of a second, to determine the best combination of boards to match both size and color. The computer then uses complicated color algorithms to arrange the boards in the order that best blends the colors. All of this is done very quickly. The Opti-Match allows one untrained operator to match and size panels at the rate of four trained matchers... consistently all day long.
-Minimum board length: 10" (254mm)
-Maximum board length: 66" (1676mm)
-Maximum board width: 6" (152mm)
-Minimum board width: 1" (25.4mm)
-Maximum thickness: 2" (51mm)
-Maximum panel width: 36" (914mm)
-Complete with scissor lift and transformer for operation on 600V.
-The cameras and lap-top were changed 3 years ago.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.