Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

SCM T160 Vanguard with HSK spindle

Used SCM T160 Vanguard  with HSK spindle | Shapers

Machine Information Sheet Date: 10/20/2018
Inventory #: X3790AC
Machine Type: Shapers
Manufacturer: SCM
Model: T160 Vanguard with HSK spindle
Year: 2006
Region: North East US
Voltage: 230/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Very Good
Machine Capacities: -CNC Manual Machine Center with HSK Tool Change and Tilting Spindle with a Steff 4 roll feeder.

-13.5 main motor HP.

- Table dimensions 47 x 29.5

- Table height 37

- Spindle tilting (degrees) + 45 to -45

- Working height of spindle (under the nut) 140mm (5.5)

- Profile fence range (205mm stroke) -75mm to 130mm (-2.9 to 5)

- HSK 63B spindle holder 1 diameter spindles

- Max. tool diameter with profile fence 250mm (10)

- Max. tool dia. Retractable under table 320mm x 75mm (12 x 2.9)

- Spindle speeds (inverter) 900 to 10,000 rpm

- Dust outlet on fence and rear base 4-1/2 & 6

- Overall dimensions 98 x 29 x 36


- Multi shift production

- 7+ axis integrated touch screen PC (EP6007) control over: spindle speed, height & angle, fence

Infeed & outfeed, sectioned table, feeder support vert. & horiz. Program storage for up

To 999 programs

- Liquid cooled 13.5HP electro spindle with maximum power available starting at 3000 rpm

- Inverter control of electro spindle with range fro 900 to 10000 rpm and electronic brake

- Pneumatic HSK tool change system with air blower system for clean contact surfaces and safety sensors for tool change operation monitoring: spindle rotation, tool taper lock go / no-go sensor

- Spindle vertical movement on two precision linear guides, and tilt movement on precision arch formed dovetail trunion through recirculating ball screw drives.

- Flex profiling fence system with 205mm stroke referenced to the center of the spindle shaft, with movement on two linear guides by recirculating ball screw. Fence includes the ability to stroke behind spindle

- Spindle tilt angle from +45 to -45 degrees with maximum possible tool projection through angle range

- Upper mobile control panel

- Fast: sectional table to adjust for tool diameter

- Powered cross support mount for feeder with readout

- Aluminum fences screen

replacement value $55,000.00

Sales Price: $23,900.00 USD
Approximate Monthly Lease: $420.17 USD
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.