Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine


Ital  LOCKFORM PSS with pin support system

Used Ital  LOCKFORM PSS with pin support system  | Presses - Membrane






 
Machine Information Sheet Date: 11/14/2018
Inventory #: X3876AC
Machine Type: Presses - Membrane
Manufacturer: Ital
Model: LOCKFORM PSS with pin support system
Year: 2011
Region: Central Canada
Voltage: 400/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Very Good
Machine Capacities: The versatile LOCKFORM is robustly engineered and constructed with the highest quality components to assure trouble-free round the clock operation. The standard machine is equipped to thermoform PVC and Kydextm films without the use of a membrane. The machine can be delivered in a variety of loading tray configurations according to your production needs. It can be optionally equipped with our cost effective “Pin Pedestal System” to eliminate the need for pedestal panels.

Two words describe the LOCKFORM – VALUE and RELIABILITY Ask any LOCKFORM user

The LOCKFORM features state-of-the-art “membrane-less” technology. Working without a membrane makes financial sense. It saves thousands of dollars per year in replacing silicon membranes. The LOCKFORM reliably laminates films as thin as 10 mil (250 micron) thickness without any difficulty.

The LOCKFORM utilizes both vacuum below the film and positive air pressure above the film to form the film into even the most detailed profile with superior definition. Deep, intricate profiles and recessed finger pulls are no problem for the LOCKFORM. Machines that work with a membrane or with vacuum only cannot make this claim

 Heating platen dimensions.............................................1,450 x 2,800 mm (57” x 110”)  Maximum useful lamination area ................................1,334 x 2,684 mm (52,5” x 105.6”)  Maximum panel thickness (with the Pin Support System) ..............30 mm (1.18”)  PVC foil width............................................................... 1,420 -1,450 mm (55.9” – 57”)  Total laminating pressure ...............................................180 metric tons (198 US tons)  Maximum specific laminating pressure .................................5+1 kg/cm2 (71+ 14 psi)  Maximum platen temperature ................................................... 150 oC (302 oF)  Press weight ......................................................................13,000 kg (28,600 lbs)

Standard features:  The press frames are flame cut from solid steel plates, then CNC machined and assembled without welding to assure reliable sealing of the forming chamber and eliminate structural failure due to fatigue stressed welds.

 The press is equipped with a massive aluminum upper heating platen constructed with two levels of electrical resistance heating elements and channels for circulation of thermal oil assuring maximum uniformity in platen temperature. The surface is black anodized to maximize the radiant qualities of the platen. The platen temperature is precisely controlled by dual digital thermostatic controls installed in the main control panel.

 The press features ITALPRESSE’S exclusive wedge locking system providing reliable sealing of the forming chamber while eliminating the need for high tonnage press cylinders. The press is opened and closed and the forming chamber locked by small hydraulic cylinders powered by a compact, low maintenance hydraulic power unit.

 The forming chamber is sealed by a special sealing system that automatically compensates for different foil thickness.

 One automatic shuttle-loading tray.

 High efficiency vacuum pump with vacuum accumulator tank included.

 Free standing electrical control cabinet with Hitachi PLC controls and operator interface to enter cycle time parameters

 Thermoformed ABS safety enclosure with large entry doors for easy maintenance access.

- Electric cabinet and operator panel with UL/CSA approved components - Safety features as per CE standards


Included options:

- PIN SUPPORT SYSTEM The “Pin Pedestal” eliminates the expense and hassle of pedestal panels. Setting the pins is completely manual. There are no complicated electronics or pneumatic components to maintain. Just push down one row of pins around each panel. That’s all there is to it. All the remaining pins stay in the up position. At the end of the press cycle the operator can choose to have all of the pins automatically reset to the up position or leave them as set.

- TOUCH SCREEN COMPUTER CONTROL The “Touch Screen” computer control system for entry and management of all press cycle parameters - time, pressure, and temperature

transformer to operate on 600 volt included

OPEN TO REASONABLE OFFERS.
Sales Price: CALL FOR PRICING   JUST RECENTLY REDUCED

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.