Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine


Giben Onix 105 SPT Rear Loading Panel Saw

Used Giben Onix 105 SPT Rear Loading Panel Saw | Saws - Panel Beam






 
Machine Information Sheet Date: 6/20/2018
Inventory #: C3919TS
Machine Type: Saws - Panel Beam
Manufacturer: Giben
Model: Onix 105 SPT Rear Loading Panel Saw
Year: 2005
Region: South Central US
Voltage: 480/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Very Good
Machine Capacities: LIFT TABLE SPECIFICATIONS
-Lift table dimensions 3800 X 1600mm (149.5" X 63")
-Lift table stroke 800mm (31.5")
-Prepared for loading from both sides of the lift table
-Maximum stack height without a pit is 680mm (27")
-Raising and lowering speed is 700mm/min (27.6"/min)
-2 front aligners behind the cut line
MACHINE BASE SPECIFICATIONS
-Cutting length 3800 mm (12.5 ft.)
-Saw blade projection 105mm (4.14")
-Grippers opening 105mm (4.14")
-Maximum depth of clean cut 93mm (3.7")
-Main saw blade diameter 380mm (15")
-Main saw motor 13.2Kw (18Hp)
-Scoring saw blade diameter 180mm
-Scoring saw motor 1.1Kw (1.5Hp)
-Pneumatic quick change for main and scoring blades
-Automatic main blade projection control depending on book height being cut
-Saw carriage traverse drive: Inverter
-Saw carriage feed speed, variable 5 to 100m/min (16 to 328ft/min)
-Saw carriage return speed 100m/min (328ft/min)
-Double roller side aligner
-Automatic positioning of side aligner
-Pneumatic locking mechanism of side aligner
-Overall stroke of side aligner 1250mm (49")
-Minimum strip width that can be aligned 70mm (2.75")
-Pneumatic quick saw blade release
MACHINE PUSHER SPECIFICATIONS
-Pusher drive AC brake motor driven by inverter
-Pusher guidance by duel rack and pinion plus round guide bar
-Pusher forward feed speed (recommended at 25m/min for safety (82ft/min) 0.8 to 60m/min (1 to 196ft/min)
-Pusher return speed 60m/min (196ft/min)
-Support rollers in pusher area: Ten (10) roller profile rails
-Number of floating grippers: Seven (7)
AIR FLOTATION TABLE SPECIFICATIONS
-Four (4) 510 x 2000mm (20 X 79") air flotation tables
-Melamine sliding shelf between the first 2 tables fence side
-Grooving option
-CE safety fencing
-CONTROLLER
-Based on Windows XP or Windows 2000
-G-VISION is the IBM PC based computer controller with graphic operator guidance, automatic and absolute operation and customizable diagnostics for easy troubleshooting
-On board G-Vision pattern planner
-Label printing is enabled
Sales Price: CALL FOR PRICING   JUST RECENTLY REDUCED

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.