Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine


Morbidelli Author 655S

Used Morbidelli Author 655S | CNC Machining Centers - Pod and Rail





 
Machine Information Sheet Date: 10/16/2018
Inventory #: C3942TS
Machine Type: CNC Machining Centers - Pod and Rail
Manufacturer: Morbidelli
Model: Author 655S
Year: 2007
Region: South Central US
Voltage: 460/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Good
Machine Capacities: The Morbidelli Author 655 owes its rigidity to the design and weight of its reinforced base and innovative one-piece frame utilizing a stationary "Y" axis support arm. All portions of the base are of heavy gauge steel and are normalized after welding, a process which ensures that all stress in the base is removed before it is machined and drilled for the guides.
-High precision, high load prismatic bearing guides
-AC servo motors in all three axes
-Solid state inverter controls router arm
-Remote control pendant
-Low voltage stabilizer
-Office PC based controller
-Xilog-operator interface
-Air conditioner for electrical cabinet
-15HP HSK electrospindle with rapid 10 tool changer
-3HP 0-360 grovving saw
-38 spindle drilling unit (14 in X, 16 in Y, 3+3 horizontal spindles in X and 1+1 horizontal spindles in Y)
-Tubeless vacuum hold-down system with digital readouts
-The worktable is equipped with a total of 8 pop-up side stops
-Vacuum switch knee activated for 4/8 working areas
-Safety bumpers and protective cage
-Automatic lubrication
-Worktable length: 5500mm
-Worktable width: 1300mm
-Boring pattern dimension:
Maximum in Y axis vertical (15 drills): 1220mm
-Router working dimensions:
Maximum in X axis: 5500mm
Maximum in Y axis: 1385mm
-Spindle main motor: 4HP, 3000-6000 RPM
-Electrospindle: 15 HP, liquid cooled, HSK, rapid 10 tool changer
-Main drilling unit:
No. of vertical spindles: 14 in X-axis, 16 in Y-axis
No of horizontal spindles: 3+3 in X-axis, 1+1 in Y-axis
-Maximum linear positioning speeds:
X axis: 40 m/min (131 ft/min)
Y axis: 40 m/min (131 ft/min)
Z axis: 22.5 m/min (74 ft/min)
-Panel passage: 180mm
-Z axis stroke: 280mm
-Dust extraction required: 2500 CFM
-Weight: 15,400 lbs
-Voltage: 208\230\460V/3/60
Sales Price: CALL FOR PRICING

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.