Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Holytek P 3200 TM

Used Holytek P 3200 TM | Saws - Sliding Table, Table

Machine Information Sheet Date: 2/23/2019
Inventory #: C3816TS
Machine Type: Saws - Sliding Table, Table
Manufacturer: Holytek
Model: P 3200 TM
Year: 2010
Region: Eastern Canada
Voltage: 600/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Very Good
Machine Capacities: -Sliding table dimensions: 380 x 3200
-Can operate with either a 305 (12") or 355 (14") main blade
-Main saw bore: 30mm ( 25.4")
-Maximum cutting height with blade at 90: 100
-Maximum cutting height with blade at 45: 70
-Main motor: 7.5 HP (5.5 kW)
-Main blade speed: 3,000/4,000/5,000/6000 RPM
-Scoring saw blade: 120
-Scoring saw blade bore: 22
-Scoring motor: 1 HP (0.75 kW)
-Scoring blade speed: 8,000 RPM
-Cutting width: 1,000 mm
-Cutting depths at 90- 305 (12"): 0~75mm (0~2.95")
-Cutting depths at 45 - 305 (12"): 0~53mm (0~2.09")
-Cutting depths at 90- 355 (14"): 0~100mm (0~4")
-Cutting depths at 45 - 355 (14"): 0~70mm (0~2.76")
-Cutting width: 1,300 mm
-Saw table extension: 800mm
-Parallelogram guiding guide
-Safety guard with quick connectors and hoses
-Rip fence with digital display
-Angle guide
-Two (2) control panels, one on each side of the sliding table
-Maximum work space required: 7000 x 4740 mm
-Machine dimensions: 3460 x 3540 x 1370 mm
-Machine weight: 1130 kg (2486 lbs)
Sales Price: $13,000.00 CDN
Approximate Monthly Lease: $228.54 CDN
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.