Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Doucet SPFM End Matcher

Used Doucet SPFM  End Matcher | End Profilers

Machine Information Sheet Date: 7/22/2019
Inventory #: X4215AC
Machine Type: End Profilers
Manufacturer: Doucet
Model: SPFM End Matcher
Year: 2011
Region: Central Canada
Voltage: //
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Machine Capacities: High Production End Matcher For Strip or Plank Flooring. 10" to 96" board length capacity; 3/8" to 3/4" thickness capability minimum width 1 3/4"; maximum width 3 1/4", 5 1/4" or 8 1/4" (relative to traverse 6", 9" or 12" bar spacing). End-Matcher model SPFM is designed for high production and is suitable for production capacities of 20,000 to 30,000 board feet of random length Strip or Plank Flooring per shift.Specifications: -- High precision ductile iron chains, hardened steel sprockets, massive traverse bars -- 20 HP Electric Motor with a Variable Speed Drive up to 80 feet per minute -- 5 HP spindle motors -- 9 inch center to center standard traverse bar spacing -- Fully enclosed machining centers, all adjustments made easy by dial indicators -- Dynamic braking on all spindle motors -- Electronically controlled chain lubrication systemStandard Features: -- 27` long by 96" wide feed conveyor -- 3" Pitch ductile iron chains, linked by 3/4" press fit dowel pins, driven by 15" hardened steel sprockets -- Massive 2" by 3/4" traverse bars suitable for machining 0.375" to 0.75" thick flooring -- Air Bag & Belt hold-downs -- 9" Center to center traverse bar spacing (6" and 12" possible) -- Feed speed up to 80 FPM powered by a variable flow 20 HP hydraulic power unit -- Injection type chain lubrication system -- (3) 36" Wide side-shift conveyors -- 3" Diameter side-shift rollers dual driven by 1 HP motors -- Tongue and groove machining centers laid out on opposite sides of the feed conveyor -- Machining centers are totally enclosed and equipped with interlocked doors -- (2) 6" Dust collector connectors on lower side of each machining center (1000 CFM each) -- Tongue machining center with 3 - 5HP spindle motors, (trimmer, top and bottom tongue groovers) -- Groove machining center with 2 - 5HP spindle motors, (trimmer and horizontal groover) -- Tooling system for regular or beveled top end-matching -- 12" Dia. x 30mm bore trim saws and 12"

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.