Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Giben Smart 95 SP

Used Giben Smart 95 SP | Saws - Panel Beam

Documents Related to this Machine:
Machine Information Sheet Date: 10/25/2020
Inventory #: C4480TS
Machine Type: Saws - Panel Beam
Manufacturer: Giben
Model: Smart 95 SP
Year: 2010
Region: South West US
Voltage: 480/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Machine Capacities: -This machine was delivered new to its current owner in July 2011
-Cutting length 3800mm (12.5`)
-Blade projection 95mm (3.75")
-Groove cutting capability
-Automatic saw blade projection according to book height
-Grippers opening 105mm (4.13")
-Max depth of clean cut 83mm (3.3")
-Main blade diameter 360mm (14.2")
-Main saw arbor 50mm
-Main saw motor 18HP
-Scoring saw diameter 180mm
-Scoring saw motor 2HP
-Saw carriage traverse by brushless AC with inverter
-Saw carriage feed speeds from 5 to 100m/m (16 to 328f/m)
-Carriage return at 100m/m (328f/m)
-Pneumatic locking, automatic positioning side aligner by a roller behind the cut line
-Side aligner stroke 1850mm (72.8")
-Front and rear steel square fences
-Min width to side align 60mm (2.4")
-Pneumatic quick release saw blade hubs
-Pusher stroke 3350mm (10` 11.5")
-Pusher drive by Brushless Servo
-Rack and pinion pusher guidance
-Pusher advancing speeds .8 to 60m/m. .8 to 25m/m (2.5`-82` {CE Norm}set at factory for operator safety).
-Pusher return at 60m/m (197`/min)
-6 floating grippers
-9 Roller profiles under pusher
-PLC Moeller
-Embedded PC on Windows XP
-G-Vision controller on a Pentium processor
-18" flat screen color monitor
-102 key standard keyboard with mouse
-Real time graphic display of cutting patterns
-Metric & Imperial measure
-Selectable English, French, Spanish
-On screen help, error messages and on screen diagnostics
-LAN network ability
-Downloading from optimizing programs
-Uploading of data for further processing
-1 only 2000 X 510mm and 3 only 1300 X 510mm air tables
-Safety trip bar along cut line
-Safety flaps
-Saw carriage and pusher cables in cable tracks
-Protection fence around rear of machine
-Time delay on saw carriage cover
-Label printing software enabled
-Extraction: 1X200mm from base and 2X76mm from beam

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.