CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
Contact Us About This Machine
|Machine Information Sheet||Date: 7/23/2021|
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
|Machine Capacities:||-4x unit available
-Pneumatic under pinning machine for the assemble of any shape and kind of quadrangular, hexagonal, octagonal or curve frames.
-The pieces of mouldings to be joined are connected tightly by a steel staple.
-The staples are on coils and available in different sizes, according to the height of the mouldings. It is possible to set staples in 2 or more different positions and drive 2 or more staples one behind the other into the back of the mouldings.
-Frontal safety shield is standard.
-No electric power is required.
-Moulding dimensions capacity:
*with VC or VM staples: max. width 120mm (4 3/4"); height 70mm (2 3/4"); min width 4mm (1/8"); height 5mm (1/4")
*with NR or VR staples: max. width 120mm (4 3/4"); height 70mm (2 3/4"); min width 5mm (1/4"); height 5mm (1/4")
-Production rate: 150-200 finished frames per hour (it varies with frame dimensions)
-Compressed air: 6 bar; consumption 6 Nl/cycle and about 120 Nl/min
-Overall dimensions: 900mm (35 1/2")W x 680mm (26 3/4")L x 1250mm (49 1/4")H
-Weight: 75kg (165 lbs)
|Sales Price:||CALL FOR PRICING|
|Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.|