Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Giben Onix 90 SP

Used Giben Onix 90 SP | Saws - Panel Beam

Machine Information Sheet Date: 9/18/2021
Inventory #: C4555TS
Machine Type: Saws - Panel Beam
Manufacturer: Giben
Model: Onix 90 SP
Year: 2004
Region: North West US
Voltage: 460/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Good
Machine Capacities: -Cutting length 3800 mm (12.5 ft.)
-Saw blade projection 90 mm (3.54 inches)
-Grippers opening 90 mm (3.54 inches)
-Maximum depth of clean cut 80 mm (3.15 inches)
-Main saw blade diameter 350 mm
-Main saw motor 13.2 Kw (18 Hp)
-Scoring saw blade diameter 180 mm
-Scoring saw motor 1.1 Kw (1.5 Hp)
-Saw carriage traverse drive: Inverter
-Saw carriage feed speed, variable 5 to 100 m/min (16 to 328 ft/min)
-Saw carriage return speed 100 m/min (328 ft/min)
-Constant contact roller side aligner
-Automatic positioning of side aligner
-Pneumatic locking mechanism of side aligner
-Overall stroke of side aligner 1220 mm (48 inches)
-Minimum strip width that can be aligned 60 mm (2.4 inches)
-Pneumatic quick saw blade release
-Pusher stroke 3850 (12.6 ft)
-Pusher drive AC brake motor driven by inverter
-Pusher feed speed (recommended at 25 m/min. for safety) 0.8-60 m/min (1-196 ft/min)
-Pusher return speed 60 m/min (196 ft/min)
-Support rollers in pusher area: Nine (9) roller profiles rails
-Number of floating grippers: Seven (7)
-Four (4) 510 x 2000 mm air flotation tables
-Grooving option
-G-VISION is the IBM PC based computer controller with graphic operator guidance, automatic and absolute operation and customizable diagnostics for easy troubleshooting
-On board pattern planner
-Label printing enabled

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.