Used Woodworking Machinery CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Tagliabue TAG 3PLL EU 1350

Used Tagliabue TAG 3PLL EU 1350 | Sanders - Wide Belt

Documents Related to this Machine:
Machine Information Sheet Date: 10/26/2021
Inventory #: C4559TS
Machine Type: Sanders - Wide Belt
Manufacturer: Tagliabue
Model: TAG 3PLL EU 1350
Year: 2010
Region: North East US
Voltage: 480/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Very Good
Machine Capacities: -Sanding width: 1350mm
-One (1) longitudinal segmented pad 16mm pitch
-One (1) double oscillating spindle brush unit
-Two (2) insert brushes
-Peripheral units
-Work piece thickness: from 3 to 150mm
-Work plane height from the floor: 900mm +/- 20mm
-Feed speed: 5-25 m/min, gearbox 4.0 kW
-Fitting of sanding belt and operation: right side
-Compressed air consumption: 6 bar
-CNI computer PLC control with 15" touch screen
-Fine work piece sensing
-Segmented pressure beam with computer-controlled selective pressure adjustment
-Longitudinal sanding unit with segmented pressure beam with computer-controlled selective pressure adjustment
-Sanding belt measurements: 1350 x 2620mm
-Chevron belt dimension: 1350 x 2250mm
-Sanding belt rotational speeds: 1-20 inverter m/sec
-Drive power: 15 Kw
-Pitch: 16, 80mm segments
-Super finish pad unit
-One (1) double oscillating spindle brush unit
-Brush orthogonal diameter depending: 15 x 200mm
-Slots: 28
-Sanding inserts: 20 x 70mm
-Backing in Mylon: 20 x 65mm
-Sanding belt rotational speeds: 1-1400 1/min
-Drive power: 2.2 KW
-Oscillation power: 1.5 Kw
-Two (2) bi directional longitudinal brush units
-Brush diameter: 390mm
-Body: 250mm
-Slots: 114 (57 inserts with 57 backings)
-Sanding inserts: 70 220/320 mm
-Backing in Nylon: 65mm
-Sanding belt rotational speed: +/- 0-800 1/min
-Drive power: 2.2 KW
-Antistatic brush roll unit for work pieces
-Carpet cleaning device: Timed oscillating carpet blower
-Work piece suction device: A suction table to secure smaller components during processing
-Rotating blowers for cleaning the work pieces
-In-line solution
-One (1) front and one (1) rear roller table with one driven roller

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.