|
CONTACTS MACHINERY, INC. 25 ch. Schippel Montcalm, QC J0T2V0 PHONE: 866-514-0890 Contact Us About This Machine |
Biesse Akron 1440A premil.corner rounding |
||||||||||||||
|
|
|||||||||||||
| Machine Information Sheet | Date: 3/22/2023 |
| Inventory #: | X4933AC |
| Machine Type: | Edgebanders |
| Manufacturer: | Biesse |
| Model: | Akron 1440A premil.corner rounding |
| Year: | 2017 |
| Region: | Central Canada |
| Voltage: |
400/3/50
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter. |
| Condition: | Very Good |
| Machine Capacities: | *****NOTE ; NEEDS TO BE SOLD, HUGE PRICE REDUCTION, NEED ROOM IN THE SHOP****** workpiece thickness 10-60 mm edge height 14-64 mm Edge thickness roll material melamine, PVC, ABS, veneer 0,4-3 mm Edge thickness strip material 0,4-10 mm Workpiece projection 25 mm Panel length min. 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 8-12-15-18 m/min Joining unit Infrared lamp IRL 700 Gluing unit Quickmelt QM 703 EVA melting glue Special glue container for PU glue Additional glue container for EVA gluing unit with melting device Automatic edge feed Cutter knife Pressure zone 1+ 2 rollers Cross-cut unit 2x 0,8 kW, 12000 rpm front/rear , inclination 0 °-15° Fine trimming unit 2×0,6kW, 12000 rpm top/bottom 2 multifunctional form milling units 0,65 kW each Corner rounding, straight workpieces, post and softforming 90-180 degrees Joining milling unit 2x 1,8 kW; 12000 rpm Scraper unit Flat scraper Buffing unit 2×0,37 kW NC control SMART TOUCH Connected load 13 kW Weight 1900 kg Machine dimensions 5500×1700 mm |
| Sales Price: | $59,700.00 CDN JUST RECENTLY REDUCED |
| Approximate Monthly Lease: |
$1,045.50 CDN
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates. |
| Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply. |