Used Woodworking Machinery CONTACTS MACHINERY, INC.
25 ch. Schippel
Montcalm, QC J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine


Biesse Akron 1440A premil.corner rounding






 
Machine Information Sheet Date: 3/22/2023
Inventory #: X4933AC
Machine Type: Edgebanders
Manufacturer: Biesse
Model: Akron 1440A premil.corner rounding
Year: 2017
Region: Central Canada
Voltage: 400/3/50
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Very Good
Machine Capacities: *****NOTE ; NEEDS TO BE SOLD, HUGE PRICE REDUCTION, NEED ROOM IN THE SHOP******

workpiece thickness 10-60 mm
edge height 14-64 mm
Edge thickness roll material melamine, PVC, ABS, veneer 0,4-3 mm
Edge thickness strip material 0,4-10 mm
Workpiece projection 25 mm
Panel length min. 140 mm
Minimum width (at 140 mm length) 85 mm
Minimum width (at 250 mm length) 50 mm
Feed speed 8-12-15-18 m/min
Joining unit
Infrared lamp IRL 700
Gluing unit Quickmelt QM 703 EVA melting glue
Special glue container for PU glue
Additional glue container for EVA gluing unit with melting device
Automatic edge feed
Cutter knife
Pressure zone 1+ 2 rollers
Cross-cut unit 2x 0,8 kW, 12000 rpm front/rear , inclination 0 -15
Fine trimming unit 20,6kW, 12000 rpm top/bottom
2 multifunctional form milling units 0,65 kW each Corner rounding, straight workpieces, post and softforming 90-180 degrees
Joining milling unit 2x 1,8 kW; 12000 rpm
Scraper unit
Flat scraper
Buffing unit 20,37 kW
NC control SMART TOUCH
Connected load 13 kW
Weight 1900 kg
Machine dimensions 55001700 mm

Sales Price: $59,700.00 CDN   JUST RECENTLY REDUCED
Approximate Monthly Lease: $1,045.50 CDN
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.