DMC Unisand K 1350

Machine Information Sheet

Date: 11/21/2024

Inventory #:	C5056TS
Machine Type:	Sanders - Planer/Wide Belt
Manufacturer:	DMC
Model:	Unisand K 1350
Year:	2007
Region:	Central Canada
Voltage:	600/3/60 Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition:	Very Good
Machine Capacities:	BOTTOM/TOP CALIBRATING SANDING LINE MODEL UNISAND K 1350 * Year of production: 2007 * Tension: 600 V * Frequency: 60 Hz * Working width: 1350 mm * Abrasive belt width: 1370 mm * Abrasive belt length: 1900 mm * Constant pass line at 940 mm from the floor level BOTTOM UNITS MACHINE 1st unit (ROLLER) * 250 mm diameter steel roller * Oscillating blowers * Pneumatic on/off for the roller * 30 kW motor (=36 kW @ 60 Hz) 36KW = approx 48HP 2nd unit (COMBINED: ROLLER + PAD) * 175 mm diameter rubber coated roller (85 shores) * EPICS electronic sectional pad (46 segments) * Oscillating blowers * Pneumatic on/off for the roller * Sanding pad pressure management through control panel * 2-speed 18.5 kW motor (= 22 kW @ 60 Hz) 22 KW = approx 30 HP 3rd unit (PAD) * EPICS electronic sectional pad (46 segments) * Oscillating blowers * Sanding pad pressure management through control panel * 15 kW motor with inverter control 15 KW = approx. 20 Hp Other devices * Single phase transformer * Autotransformer for inverters * 4 kW 4KW = approx 5HP feed mat driving motor with inverter control * Vacuum table to hold-up the feed mat, powered by a 7.5 kW (= 9 kW @ 60 HZ) 9KW = approx 12HP external fan motor with silencer (to hold-up the feed mat) * Oscillating blowers for work piece cleaning at the machine out-feed * Hydra PC control panel TOP UNITS MACHINE 1st unit (ROLLER) * 250 mm diameter steel roller * Oscillating blowers * Pneumatic on/off for the roller * 30 kW motor (=36 kW @ 60 Hz) 2nd unit (COMBINED: ROLLER + PAD) * 175 mm diameter rubber coated roller (85 shores) * EPICS electronic sectional pad (46 sectors) * Oscillating blowers * Pneumatic on/off for the roller * Sanding pad pressure management through control panel * 2-speed 18.5 kW motor (= 22 kW @ 60 Hz) 3rd unit (PAD) * EPICS electronic sectional pad (46 segments) * Oscillating blowers * Sanding pad pressure management through control panel * 15 kW motor with inverter control Other devices * Single phase transformer * Autotrasformer for inverters * 4 kW feed mat driving motor with inverter control * 150 mm diameter cleaning brush (tampico) at the machine out-feed, driven by a 0.75 kW motor (0,9 kW @ 60 Hz)
Sales Price:	CALL FOR PRICING   JUST RECENTLY REDUCED

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.