Omec F11TS

Machine Information Sheet

Date: 11/23/2024

Inventory #:	C5313TS
Machine Type:	Dovetailers
Manufacturer:	Omec
Model:	F11TS
Year:	2016
Region:	North East US
Voltage:	220/3/60 Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition:	Very Good
Machine Capacities:	-Automatic numerical control machine for dovetail joints -The two-axis automatic mill cutter with numerical control, OMEC F11ts, is designed to indent dovetails, French and parallel indents for drawers and several furniture elements. The machine is extremely flexible and enables to perform ten different types of indents. Model F11ts is equipped with a spindle and a mill cutter that allow the production of indents of different heights. The machine is designed to cut single male or female workpieces or both simultaneously. Pieces can be clamped and released in manual mode by means of pneumatic valves. Controls are issued from a numerically controlled push button panel. Model F11ts is controlled by a numerical control system that is programmed to guarantee the utmost machining flexibility and to change the machining limits within the following variables: -type of indents -pitch of indents and the offset -number of indents -depth of indents -dimensions of the pieces -cutting speed and tool feeding -compensation of the tool radius variation All the adjustments can be easily carried out following the software instructions of the machine displayed on the monitor. Technical Characteristics -On board machine installed power: 3.4 Kw -Working pressure: 0.7 MPascal -One spindle -Spindle RPM: 18,000 -Blades: variable or fixed -Drawers production: n/h Dimensional Limits of Workpieces Minimum: -length: 6.69 in (170 mm) -width: 2.36 in (60 mm) -indents Height: .23 in (6 mm) -front thickness: .31 in (8 mm) -side thickness: .31 in (8 mm) Maximum: -length: 59.05 in (1500 mm) -width: 30.31 in (770 mm) -indents Height: 1.57 in (40 mm) -front thickness: 2.16 in (55 mm) -side thickness: 1.57 in (40 mm)
Sales Price:	CALL FOR PRICING

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.