*(3) Boring Machines - All 32mm and Through Feed
*(3) Boring Machines - Horizontal; Vertical and other Misc. Non 32mm
*(2) Businesses for Sale
*(0) Carvers
*(0) Chair Equipment
*(1) Clamps - Case Clamps
*(2) Clamps - Clamp Carriers
*(0) Clamps - Door
*(0) Clamps - Drawer
*(0) Clamps - Frame
*(5) CNC Machining Centers - Pod and Rail
*(9) CNC Routers - Flat Table, Nesting
*(0) Combination Machines
*(3) Compressors
*(1) Counter Top Equipment
*(0) Door Equipment
*(0) Dovetailers
*(5) Dowel Machines
*(5) Dust Collectors and Downdraft Tables
*(32) Edgebanders
*(3) End Profilers
*(0) Finger Jointers
*(3) Finishing Equipment
*(1) Fork Lifts
*(1) Glue Equipment
*(4) Jointers
*(1) Laminating Equipment
*(1) Lathes
*(5) Material Handling Equipment
*(5) Miscellaneous
*(0) Mortisers
|
Edgebanders
The edgebanders category includes machines for the application and trimming of edging on wood based, honeycomb or other panels/sheets. The edging ranges from tape as thin as .3mm (0.01") through thicker PVC edging up to 5mm (0.2"), both from continuous coils. Edgebanders also apply veneers and solid wood strip edging up to 30mm (1.2") thick. Edgebanders apply edging to straight edges as well as shaped (softformed) edges. Some have pre-mill heads to prepare the edge for application and some have corner rounding units to end trim shaped (softformed) edges.
|
Biesse Akron 1310, 2011
|
Biesse Akron 1440-A, 2020
JUST RECENTLY REDUCED
|
Biesse Akron 1440A premil.corner rounding, 2017
|
Biesse Akron 430, 2014
|
Biesse Akron 840, 2006
|
Biesse Ergho 3, 2003
|
Biesse Akron 1320 Biesse Akron 1320, 2014
|
Biesse Polymac Akron 425 AN, 2007
|
Biesse Speedy Speedy , 2005
|
Brandt Brandt O FP 20 corner rounder , 2002
|
Brandt KDF 210 (Ambition 1210 F), 2016
|
Brandt KDF 440 (Highflex 1440), 2013
|
Brandt KDN 420, 2011
|
Brandt Optimat KD-56, 2001
|
Brandt Optimat KDN 520, 2005
|
Brandt edgebander Brandt KDF 530C , 2003
|
Felder G-400 Felder G-400, 2011
|
Felder G560 Felder G560, 2012
|
Holz-Her 1310-1, 2003
|
Holz-Her Auriga 1308 XL, 2013
|
Holz-Her Sprint 1320, 2005
|
Homag Ambition 2270, 2011
|
Homag Optimat KL25/7/A12/30, 2005
|
Homag PROFI KAL 310/6/A20, 2015
|
Homag Profi KAL 310/6/A3, 2014
|
Homag Profi KAR 310/6/A3, 2010
|
SCM Olimpic K400, 2013
|
SCM Olimpic S222 GS, 2003
|
SCM - Stefani Solution, 2010
|
SCM K208ER SCM K208ER, 2001
|
Tecnoma XTF 10A, 2008
|
VITAP Rounder, 2002
|
Moulders (2)*
Packaging And Shrink Wrapping Equipment (1)*
Pallet Machinery (0)*
Planers - Thickness (1)*
Postformers (0)*
Presses - Hot/Cold (3)*
Presses - Membrane (0)*
Routers - Manual, Pin (1)*
Sanders - DeNibbing and Brush (3)*
Sanders - Edge Stroke (0)*
Sanders - Misc (0)*
Sanders - Profile, Mold (1)*
Sanders - Wide Belt (6)*
Saw Mill Equipment (0)*
Saws - Band, Resaw (1)*
Saws - CutOff, Miter, Radial Arm (2)*
Saws - Misc (0)*
Saws - Optimizing Cross Cut (1)*
Saws - Panel Beam (12)*
Saws - Rip Saw (2)*
Saws - Sliding Table, Table (3)*
Saws - Vertical Panel (1)*
Shapers (5)*
Sharpening Equipment (2)*
Software (0)*
Stair Equipment (0)*
Stone Machinery (0)*
Tenoners - Double End (0)*
Tenoners - Single, Round End (0)*
Veneer Equipment (0)*
V-Groovers (0)*
Wood Waste Equipment (2)*
|
