CONTACTS MACHINERY, INC.
200 Round Lake South, Montcalm,
Quebec, Canada, J0T2V0
Contact Us About This Machine
|Machine Information Sheet||Date: 6/17/2021|
|Region:||North East US|
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
|Machine Capacities:||The Hoffmann PP2 dovetail routing machine is a free standing production unit. This model is equipped with two high-speed router motors, to process two parts simultaneously. The supplied 45 degree fence plate, which is guided in a keyway in the machine table, is used to accurately position the material on the table. The locations of the dovetail slots for the Hoffmann Keys are adjusted by simply moving this fence plate.
The machine is equipped with a pneumatic foot pedal. Upon pressing the foot pedal, the routing sequence is initiated:
-pneumatic clamps secures workpieces on machine table
-router heads advance until the pre-set height position is reached
-router heads return to base position
-pneumatic clamps releases workpieces
Output is approx. 16 routing strokes per minute, which translates into 4 completely processed rectangular frames. These numbers include material handling, but obviously depend on routing depth, feed speed, material flow and operator performance as well. Flow control valves on the main pneumatic cylinder allow the operator to adjust the upward and downward feed rate independently, depending on the material being processed.
A heavy-duty cast aluminum table provides a large work surface. The steel cabinet has a 4" diameter dust collection port on its backside for dust free operation.
The supplied router bits are solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes. Comes with a tool kit and set-up jig, which allows a router bit change in only minutes.
-Power Supply: 115 volts, 60 Hz, 1000 Watts
-Motor size: 2 x 1,000 watt, heavy-duty construction, built-in overload protection
-Motor speed: 33,000 rpm
-Collet size: 1/4" and 8mm collets included
-Air Supply: 90 psi
-Capacity: approx. 4 rectangular frames per minute
-Max. routing height: 4"
-Max. material height: 5 3/4"
-Key sizes: W-1, W-2, W-3, W-4
-Shipping weight: 160kg
|Sales Price:||$6,000.00 USD|
|Approximate Monthly Lease:||
Approximate monthly payments are based on approximate lending rate considering 1st and last month down payment, 60 month term and $1.00 residual buy back. This approximate monthly payment amount is for budgetary purposes only. Based on US leasing rates.
|Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.|