Used Woodworking Machinery CONTACTS MACHINERY, INC.
25 ch. Schippel
Montcalm, QC J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine


Biesse Rover A 3.30 Biesse Rover A 3.30


 
Machine Information Sheet Date: 11/6/2024
Inventory #: X5265bh
Machine Type: CNC Machining Centers - Pod and Rail
Manufacturer: Biesse Rover A 3.30
Model: Biesse Rover A 3.30
Year: 2008
Region: Western Canada
Voltage: //
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Good
Machine Capacities: ROVER A 3.30 K6 - numerically controlled machining centerWorking fields: X = 3060 mm; Y =
1260 mm; Z = 150 mmThe composition includes: Automatic lubrication system 6 ATS panel
supports - L = 1200 mm - 18 sliding bases 6 Stops with a stroke of 115 mm 6 Stops
with a stroke of 115 mm positioned at 970 mm 4 Side stops with a stroke of 115 mm (2 Lh +
2 Rh) inclusive of the pneumatic system 4 Removable central stops with a stroke of 115
mm (2 Lh + 2 Rh) inclusive of the pneumatic system Division of the vacuum system in 2
work areas in X and in 4 independent locking areas in Y Division of the pneumatic system
in 2 work areas in X and in 4 independent locking areas in Y Pneumatic system for bar
supports - 2 independent work areas in X 4 Bar supports 12 Clamping units for the
locking of narrow pieces 12 Vacuum modules with dimensions 132 x 146 x H48 mm 6
Vacuum module s with dimensions 132 x 75 x H48 mm Belt conveyor for the removal of
chips and off-cuts 90 m3/h vacuum pump Auxiliary vacuum system 12 kW (16.1 HP)
Electrospindle with ISO 30 adaptor, air cooled Operating device with 360° interpolation
(C axis) Boring head BH 21 L Prearrangement for the assembly of a chip deflector
Iron gripper for the storage of a chip deflector Revolving tool changer with 18 places
Remote keyboard - advanced version Numerical control XP600 Graphic operator
interface BIESSEWORKS Air conditioner for electric cabinet Inverter Safety
devices with 2 front safety mats and back and side fencing
12 kW (16.1 HP) Electrospindle, HSK F63 adaptor, air cooling, in replacement of the 12 kW

(16.1 HP) ISO 30 standard electrospindle

Blowing unit for electrospindle* Incompatible with 5-axes units
Transformer for voltages different from 380/400/415 Volt 50/60 Hz
Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine
BiesseWorks Advanced - Office version2 Hardware protection keys included * Requires the
operating system Windows XP or Windows 7* For NC BH660, XP600 and NC1000 requires BiesseWorks
Advanced - Machine version
Sales Price: CALL FOR PRICING

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.