Used Woodworking Machinery CONTACTS MACHINERY, INC.
25 ch. Schippel
Montcalm, QC J0T2V0
PHONE: 866-514-0890
Contact Us About This Machine

Giben Prismatic2 h115/SPT Rear Load Panel Saw

Machine Information Sheet Date: 5/20/2022
Inventory #: C4796TS
Machine Type: Saws - Panel Beam
Manufacturer: Giben
Model: Prismatic2 h115/SPT Rear Load Panel Saw
Year: 2001
Region: Eastern Canada
Voltage: 460/3/60
Can be transformed to required voltage for a nominal fee. Single phase available thru a phase converter.
Condition: Good
Machine Capacities: -3800mm (12.1`) cut line
-3800mm (12.1`) X 1600mm (5.2`) lift table with idle material advancing rollers
-lift table driven by a 4.8HP rise and fall motor
-3800 (12.1`) X 1600 (5.2`) powered in-feed conveyor
-800mm (27.5") bunk capacity without the machine raised on 4" pillars (31.5" if raised).
-115mm (4.5") saw blade projection
-Pusher by servo motor on high precision rack and pinion
-AC brushless pusher advancing from 1 to 60m/m (3 to 197`/min)
-Pusher returns at 60m/m (197`/min)
-8mm (.31") minimum thickness for automatic loading from lift table
-16 support roller modules under the pusher
-8 floating 117mm (4.6") opening grippers
-Raising grippers on return
-Double full length pressure beam
-4 (four) 2000 X 510mm (78.7 X 20") air tables
-22HP main motor with 430mm (16.9") diameter blade
-3.5HP scoring motor with 215mm (8.5") blade
-Rapid change tooling on main and scoring
-Scoring adjustment with blades in motion
-AC brushless saw traverse motor advances from 1 to 130m/m (3 to 427`/min)
-Saw carriage return at 130m/m (427`/min)
-Automatic pre-positioning side aligner to 2200mm (86.6") with double independent rollers
-Klockner Moeller PLC
-One 200mm (7 7/8") lower and two 115mm (4 1/2") upper extraction outlets
-Automatic saw blade height adjustment depending on book height
-G-Drive2 PC based controller on Windows-98 operating system
-Real time graphics
-15" VGA color monitor
-Memory capacity for 999 different jobs, each with 99 patterns, each with up to 52 sizes, each repeatable up to 99 times
-RS-232 data port for downloading cutting patterns from an office PC
-Battery backup for 30 days
-Ammeter for main saw motor

Contacts WW Machinery, Inc. sells pre-owned machinery on a first come, first served basis. Pre-owned machinery is not covered under any warranty or Government requirements. It is purchased "as-is - where-is, with all faults." Descriptions and specifications are to the best of our knowledge (some information is communicated via third party sources). It is strongly recommended that the machinery be inspected prior to purchasing to confirm the condition and specification. Additional charges such as crating and loading may apply.